gate position

The Research of Airport Gate Position Scheduling Expert System

机场机位分配专家系统研究

Using simulation experiment, shrinkages of injection molding parts with different thickness are studied. Simulation experiments are performed with same parameter of process condition and fixed gate dimension and position.

采用模拟实验的方法，在相同注射工艺条件下，保持浇口尺寸和位置不变，对不同厚度制品的成型收缩率进行模拟实验研究，绘制了模拟实验曲线。

The effects of the filling velocity and gate shape and located position on semi-solid forming quality and flow patterns were investigated with simulation.

对不同充填速度、浇口形状以及浇口设置位置下半固态成形过程进行模拟分析。

It mainly includes the simulation of the depth of the buried gate, the gate horizontal position, the gate shape, the gate field plate structure, and the gate length on device characteristics.

接下来研究了栅极结构参数，包括埋栅深度、栅极水平位置、栅极形状、栅场板结构以及栅长等对器件特性的影响。

Tracking of light points is based on adaptive adjustment of gate size and gate position. In order to improve computing precision, the Cardinal spline functions are used as the interpolating functions.

在实时跟踪方法中，自适应调整波门位置及大小，并采用Cardinal样条进行插值以提高光点坐标计算精度。

Includes floorstand with gate position indicator, handwheel, fittings and extension.

包括带有闸板指示器的地轴承架, 手轮, 连接件和加长件.

Then using CAE analysis and through adjusting the gate position, weld lines can be optimized to the minimum length, and this result has also been identified by practice.

进而应用CAE软件进行分析，通过调整浇口位置，对熔接痕的长度进行优化，使其减少到最小，结果得到实践验证。

Study on Hydraulic Characteristics of the Gate Inclined to Horizontal Position after Falling

下卧式闸门水力特性研究

Optimizing Control of Gate Position of Valve-typed Injection System of Injection Mold

注塑模阀式浇注系统的浇口位置优化控制

Design and Study on the Sensor of Gate Position and the problemes on Its Communication

闸门开度测量与分布式通信问题的研究与设计

The successful renovation of automatic checking of gate position provides a new mode and way of thinking for automatization of irrigation and water& electricity works.

这项闸门位置检测自动化的改造成功，为水利、水电自动化提供新的模式及思路。